Washer fluid, Cruise control – BMW M6 Convertible 2010 User Manual

Page 65

Advertising
background image

Co

n

tr

o

ls

63

Re

fe

re

n

c

e

At

a

g

la

n

c

e

D

riv

in

g ti

ps

C

o

m

m

uni

ca

ti

o

n

s

Na

v

iga

ti

on

En

te

rt

a

in

m

e

n

t

M

o

bi

lity

fluid. Do not use washing mechanisms when
the washer fluid reservoir is empty, otherwise
you will damage the washer pump.

<

Windshield washer nozzles

The windshield washer nozzles are heated
when the engine is running or the ignition is
switched on.

Washer fluid

Washer fluid antifreeze is flammable. For
this reason, keep it away from ignition

sources and store only in the closed original
container out of reach of children. Otherwise,
there is the danger of bodily injury. Always
observe the instructions for use provided on the
containers.

<

Filler neck for washer fluid

All washer nozzles are supplied from one reser-
voir.
Fill with water and – if required – with a washer
antifreeze, according to manufacturer's recom-
mendations.

In order to maintain the mixture ratio, mix
the washer fluid before filling.

<

Capacity

Capacity approx. 5.3 US quarts/5 liters.

Cruise control

The concept

The cruise control is available for use at speeds
of approx. 20 mph/30 km/h and higher. The

vehicle stores and maintains the speed that you
set using the lever mounted on the steering col-
umn. If the engine braking effect is insufficient
on a downhill grade, the set speed may be
exceeded. Speed can drop on uphill grades if
the engine output is insufficient.

Do not use the cruise control under driv-
ing conditions that do not permit a con-

stant speed, e.g. when driving on winding
roads, in heavy traffic or in poor road conditions
such as snow, rain, ice, loose road surface, and
poor visibility. Otherwise you could lose control
of the vehicle and cause an accident.

<

One lever for all functions

1 Maintaining, storing and increasing speed
2 Maintaining speed, storing speed, and

decelerating

3 Interrupting and deactivating system
4 Resuming stored speed

Maintaining, storing and increasing

speed

Press lever to resistance point, arrow

1:

The speed currently being driven is maintained
and stored. The display

1 in the speedometer,

see below, indicates this regulated speed.
Every time you press the lever, the vehicle's
speed increases by roughly 1 mph/1 km/h.
Press lever to resistance point for a longer time:
The vehicle accelerates without pressure on
the accelerator pedal. The system maintains
and stores your current speed as soon as you
release the lever.
Press the lever beyond the resistance point:
The speed is increased to the next fives posi-

Online Edition for Part no. 01 41 2 602 735 - © 08/09 BMW AG

Online Edition for Part no. 01 41 2 602 735 - © 08/09 BMW AG

Advertising
This manual is related to the following products: