Wiper system, Windshield wipers, Sensor – BMW 650i Convertible 2009 User Manual

Page 68: Driving

Advertising
background image

Driving

66

Triple turn signal activation

Press the lever to the resistance point; the turn
signal flashes three times.
You can activate or deactivate this function.
iDrive, for operating principle refer to page

16

.

1.

Press the

button.

This opens the start menu.

2.

Press the controller to open the menu.

3.

Select "Settings" and press the controller.

4.

Select "Vehicle / Tires" and press the con-
troller.

5.

Change to upper field if necessary. Turn the
controller until "Lighting" is selected and
press the controller.

6.

Select "Triple turn signal" and press the
controller.

Triple turn signaling is activated.

The setting is stored for the remote control cur-
rently in use.

Wiper system

1 Switching on wipers
2 Switching off wipers or brief wipe
3 Activating/deactivating rain sensor

4 Cleaning windshield, headlamps and

BMW Night Vision camera

*

5 Adjusting rain sensor sensitivity level

Switching on wipers

Pull the lever upward, arrow

1.

The lever automatically returns to its initial posi-
tion when released.

Normal wiper speed

Press once.
The system reverts to operation in the intermit-
tent mode when the vehicle is stationary.

Fast wiper speed

Press twice or press beyond the resistance
point.
The system reverts to normal speed when the
vehicle is stationary.

Rain sensor

The wiper operation is controlled automatically
as a function of the rain intensity. The rain sen-
sor is located on the windshield, directly in front
of the interior rearview mirror.

Activating rain sensor

Press the button, arrow

3. The LED in the but-

ton lights up.

Adjusting rain sensor sensitivity level

Turn the knurled wheel

5.

Deactivating rain sensor

Press the button

again, arrow 3. The LED goes

out.

Online Edition for Part no. 01 41 2 600 759 - © 08/08 BMW AG

Advertising
This manual is related to the following products: