Gear sport automatic transmission with dual clutch – BMW Z4 sDrive35i 2009 User Manual

Page 57

Advertising
background image

Co

n

tr

o

ls

55

Refere

nce

At a glan

ce

Dr

ivi

n

g ti

ps

Commu

nication

s

Navigation

Ente

rt

ai

nme

n

t

M

o

bi

lity

Upshifts and downshifts are executed only
when they will result in a plausible combination
of engine and vehicle speed; thus, for example,
a downshift that would cause the engine to
overrev will not be executed by the system. The
gear selected is briefly displayed in the instru-
ment cluster, followed by the gear actually
in use.

Shifting gears via shift paddles* on the
steering wheel

The shift paddles allow you to shift gears with-
out taking your hands off of the steering wheel.

>

When you use the shift paddles on the
steering wheel to shift gears in automatic
mode, the transmission switches to
manual mode.

>

If you do not accelerate or shift gears using
the shift paddles for a certain amount of
time, the transmission switches back to
automatic mode.

If the selector lever is in the M/S gear
plane, manual mode remains active.

<

>

To shift up: pull one of the shift paddles.

>

To shift down: press one of the shift
paddles.

Upshifts and downshifts are executed only
when they will result in a plausible combination
of engine and vehicle speed; thus, for example,
a downshift that would cause the engine to
overrev will not be executed by the system. The
gear selected is briefly displayed in the instru-
ment cluster, followed by the gear actually
in use.

Overriding selector lever lock

Should the selector lever refuse to move out of
position P although the button on the selector
lever is pressed, the selector lever lock can be
overridden:

1.

Unclip the sleeve of the selector lever.

2.

Pull the sleeve up over the selector lever
until the sleeve is inside out.

3.

Using the screwdriver from the onboard
tool kit, refer to page

208

, press the red

lever while moving the selector lever to the
desired position.

7-gear sport automatic

transmission with dual

clutch*

The concept

This transmission is an automated manual
transmission with two clutches and two gear-
box components in which the gears are
changed without loss of torque.
You operate the transmission using the selector
lever and two shift paddles on the steering
wheel.
It offers the following functions:

>

Selection between manual and automatic
operation: sequential mode or drive mode

>

Automatic downshifting and protection
against selecting the wrong gear, even in
sequential mode

>

Launch Control acceleration assistant, refer
to page

58

>

Automatic double de-clutch

System limitations

This transmission is equipped with an over-
heating protection system that protects the
clutches against extremely high loads.

Online Edition for Part no. 01 41 2 602 116 - © 01/09 BMW AG

Advertising
This manual is related to the following products: