Turn signals/ headlamp flasher – BMW Z4 sDrive35i 2009 User Manual
Page 61
59
5.
Turn the Allen wrench as far as it will go,
arrow
2. The transmission lock is released.
Do not turn the Allen wrench in the
opposite direction as this may dam-
age the mechanism.
<
6.
Draw the Allen wrench out of the opening.
After parking the vehicle, lock the trans-
mission lock again. Otherwise, there is a
danger of the vehicle rolling.
<
Locking
1.
Press the button, see arrow.
The transmission lock is locked again.
2.
Clip the sleeve of the selector lever back in
place.
3.
Set the parking brake.
Jump-starting and towing, refer to page
.
Turn signals/
headlamp flasher
1 High beams
2 Headlamp flasher
3 Turn signals
Using turn signals
Press the lever beyond the resistance point.
To turn off manually, press the lever to the
resistance point.
Unusually rapid flashing of the indicator
lamp indicates that a turn signal indicator
has failed.
<
Indicating a turn briefly
Press the lever as far as the resistance point for
as long as you wish to indicate a turn.
Triple turn signal activation
Press the lever as far as the resistance point.
The turn signals flash once.
You can set whether it should flash once or
three times when activated.
iDrive, for operating principle refer to page
1.
Press the button.
2.
"Settings"
3.
"Lighting"
4.
"Triple turn signal"
The setting is stored for the remote control cur-
rently in use.
Online Edition for Part no. 01 41 2 602 116 - © 01/09 BMW AG