Eve ryth ing un de r co nt rol – BMW 135i Convertible 2008 User Manual
Page 80
E
ve
ryth
ing un
de
r co
nt
rol
78
Hiding Check Control messages
Press the button in the turn indicator lever.
Some Check Control messages are displayed
until the respective malfunction has been recti-
fied. They cannot be hidden. If several malfunc-
tions occur at the same time, they are displayed
in succession.
They are marked with the symbol shown
here.
Other Check Control messages are automati-
cally hidden after approx. 20 seconds, but are
kept in memory.
They are marked with the symbol shown
here.
Viewing stored Check Control
messages
1.
Push button
1 in the turn indicator lever up
or down repeatedly until the appropriate
symbol appears in the display, accompa-
nied by the words "CHECK".
2.
Press button
2.
"CHECK OK" appears if there are no Check
Control messages. If a Check Control mes-
sage has been stored, the corresponding
lamp comes on. It is accompanied by a text
message on the Control Display.
3.
Push button
1 to check for other messages.
4.
Press button
2.
The display again shows the outside tem-
perature and the time.
Viewing more information later
iDrive, for operating principle refer to page
1.
Press the
button.
This opens the start menu.
2.
Press the controller to open the menu.
3.
Select "Info sources" and press the control-
ler.
4.
Select "Service Info" and press the control-
ler.
5.
If necessary, move the highlight marker to
the uppermost field. Turn the controller
until "Check Control messages" is selected
and press the controller.
Online Edition for Part no. 01 41 0 014 954 - © 02/08 BMW AG