Latch child-restraint fixing system – BMW 335i Convertible 2008 User Manual

Page 59

Advertising
background image

Co

n

tr

o

ls

57

Re

fe

re

n

c

e

At

a

g

la

n

c

e

D

riv

in

g ti

ps

C

o

m

m

uni

ca

ti

o

n

s

Na

v

iga

ti

on

En

te

rt

a

in

m

e

n

t

M

o

bi

lity

3.

Allow the belt strap to retract and pull it taut
against the child-restraint system.

The safety belt is locked.

To unlock the safety belt

1.

Open the belt buckle

2.

Remove the child-restraint system.

3.

Allow the safety belt strap to retract all the
way.

LATCH child-restraint fixing

system

LATCH: Lower Anchors and Tethers for CHil-
dren.

To install and use the LATCH child
restraint system, follow the operating and

safety instructions provided by the manufac-
turer of the system, otherwise the protective
function of the seat may be compromised.

<

Before installing the child seat, pull the belt out
of the area for the child-restraint fixing system.

Ensure that both lower LATCH anchors
are correctly engaged and that the child

restraint system is resting firmly against the
backrest, otherwise the protective function of
the seat may be compromised.

<

The anchor points for the lower LATCH
anchors are located behind the labeled protec-
tive caps.

Coupe: child-restraint system with
tether strap

Use the top tether anchors to secure
child-restraint systems only, otherwise

the anchors could be damaged.

<

For child-restraint systems with tether straps
there are two additional anchors, see arrows.

Coupe: placement of the tether strap

Make sure the upper retaining strap does
not run over sharp edges and is not

twisted as it passes to the top anchor. Other-
wise the strap will not properly secure the child-
restraint system in the event of an accident.

<

1 Direction of travel
2 Head restraint
3 Hook for upper retaining strap
4 Anchor
5 Rear window shelf
6 Seat backrest
7 Upper retaining strap of child-restraint sys-

tem

If necessary, fold the anchors upward before
use.

1.

Push the head restraint upward.

2.

Guide the upper retaining strap between
the head restraint holders.

3.

Use the hook to clip the retaining strap to
the anchor.

4.

Push the head restraint into its lowermost
position.

Online Edition for Part no. 01 41 0 014 258 - © 08/07 BMW AG

Advertising
This manual is related to the following products: