To auto program bel, Climate – BMW 335i Convertible 2008 User Manual

Page 108

Advertising
background image

Climate

106

Maximum cooling

At outside temperatures above
32

7/0 6 and when the engine is

running, you obtain a maximum
cooling effect as soon as possible.

The automatic climate control goes into recir-
culated-air mode at the lowest temperature. Air
flows at maximum rate from the vents for the
upper body area. You should therefore open
them for maximum cooling.

AUTO program

The AUTO program adjusts the air
distribution to the windshield and
side windows, towards the upper

body area and into the footwell for you. The air
flow rate and your temperature specifications
will be adapted to outside influences as a result
of seasonal changes, e.g. sunlight or window
condensation.
The cooling is switched on automatically with
the AUTO program.

Intensity of the AUTO program

Press the AUTO button repeatedly to set the
intensity of the AUTO program. The current
setting is briefly displayed on the Control Dis-
play every time the button is pressed.
You can also set the intensity of the AUTO pro-
gram via iDrive.

1.

Press the

button.

This opens the start menu.

2.

Move the controller to the left to call up "Cli-
mate".

3.

Select "Automatic programs" and press the
controller.

4.

Select the desired intensity and press the
controller.

The selected intensity level of the auto-

matic program is switched on.

Convertible program

When the hardtop is open, the Convertible pro-
gram is selectable as well. In the Convertible
program, the automatic climate control is opti-
mized for driving with the hardtop open. In addi-
tion, the air flow rate is increased as vehicle
speed increases.
When the Convertible program has been
selected, it is automatically activated every time
the hardtop is opened.

The effectiveness of the Convertible pro-
gram can be enhanced considerably by

installing the wind deflector.

<

Adjusting air flow rate manually

Press the left side of the button to
reduce airflow. Press the right side
of the button to increase it.

You can reactivate the automatic mode for the
air flow rate with the AUTO button.
The air flow rate may be reduced or the blower
may be switched off entirely to save on battery
power. The display remains the same.

Switching the system on/off

With the blower at its lowest setting, press the
left side of the button to switch off the auto-
matic climate control. All displays are cleared
except for the rear window defroster if it is
switched on.
Press any button except REST or rear window
defroster to reactivate the automatic climate
control.

AUC Automatic recirculated-air
control/Recirculated-air mode

Switch on the desired operating
mode by pressing this button
repeatedly:

>

LED off: outside air flows in continuously.

Online Edition for Part no. 01 41 0 014 258 - © 08/07 BMW AG

Advertising
This manual is related to the following products: