To dynamic driv- ing control, Driving – BMW 650i Convertible 2008 User Manual

Page 64

Advertising
background image

Driving

62

This position is recommended for a perfor-
mance-oriented driving style.
When the selector lever is briefly moved for-
ward or back, the manual mode is activated and
the Steptronic shifts gear. The instrument clus-
ter shows M1 through M6.
Upshifts and downshifts are only carried out at a
suitable engine and vehicle speed, e.g. a down-
shift is not carried out at excessively high
engine speeds. The selected gear is briefly dis-
played in the instrument cluster, followed by the
current gear.
To resume automatic mode, press the selector
lever to the right.

Shift paddles on steering wheel

You can also shift manually with two shift pad-
dles on the steering wheel. The shift paddles
allow you to shift gears quickly, as both hands
can remain on the steering wheel.

>

When you use the shift paddles on the
steering wheel to shift gears in automatic
mode, the gearshift system switches into
the manual mode.

>

If you do not shift with the shift paddles and
do not accelerate for a certain time, the sys-
tem switches into the automatic mode
again when the selector lever is in D.

>

To shift up: pull one of the shift paddles.

>

To shift down: press one of the shift pad-
dles.

Dynamic Driving Control

The Dynamic Driving Control makes it possible
for your BMW to react in an even more perfor-
mance-oriented manner at the push of a button:

>

The speed range of the engine is optimally
utilized.

>

Gearshifts are faster.

>

The engine responds more spontaneously
to accelerator pedal movements.

>

The steering will operate in an even sportier
mode.

>

In the automatic mode, the 6th gear is not
engaged.

Activating system

Press the SPORT button.
The LED in the button lights up and SPORT is
displayed in the instrument cluster.

Deactivating system

>

Press the SPORT button again

>

Engage reverse gear

>

Switch off engine

The LED in the button and SPORT in the instru-
ment cluster go out.

Manually unlocking and locking
transmission lock

In case of a power failure, e.g. when the battery
is drained or disconnected, or an electrical fault,
manually release the transmission lock, as oth-
erwise the rear wheels are blocked and the
vehicle cannot be towed.
Only manually release the transmission lock for
towing and firmly apply the handbrake before-
hand so that the vehicle cannot roll. Reengage

Online Edition for Part no. 01 41 0 014 242 - © 08/07 BMW AG

Advertising
This manual is related to the following products: