Adaptive head light, High beams/ roadside parking lamps, La mp s – BMW X5 4.8i 2008 User Manual

Page 106

Advertising
background image

La

mp

s

104

Adaptive Head Light*

The concept

Adaptive Head Light is a variable headlamp
control system that enables better illumination
of the road surface. Depending on the steering
angle and other parameters, the light from the
headlamp follows the course of the road.
In tight curves, e.g. serpentines, or when turn-
ing, one of the two front fog lamps is also
switched on up to a speed of approx. 45 mph/
70 km/h. This provides improved illumination of
the area inside the curve.

Activating Adaptive Head Light

With the ignition switched on, turn the light
switch into the automatic headlamp control
position, refer to page

102

.

The turning lamps are automatically switched
on depending on the steering angle or the use
of turn signals.
To avoid blinding oncoming traffic, the Adaptive
Head Light directs light towards the front pas-
senger side when the vehicle is at a standstill.
When driving in reverse, both turning lamps are
active.

Malfunction

The LED next to the symbol for automatic head-
lamp control flashes. Adaptive Head Light is
malfunctioning or has failed. Have the system
checked as soon as possible.

High beams/

roadside parking lamps

1 High beams
2 Headlamp flasher
3 Roadside parking lamps

Roadside parking lamps, left or right*

You also enjoy the option of lighting up just one
side of your vehicle when parking.

Switching on

After parking the vehicle, press the lever up or
down beyond the resistance point, arrow

3.

The roadside parking lamps drain the bat-
tery. Do not leave them switched on for

long periods of time, otherwise it may no longer
be possible to start the engine.

<

Switching off

Briefly press the lever in the opposite direction
up to the resistance point, arrow

3.

Online Edition for Part no. 01 41 0 014 248 - © 08/07 BMW AG

Advertising
This manual is related to the following products: