Coolant – BMW X5 4.8i 2008 User Manual

Page 246

Advertising
background image

Under t

h

e

ho

od

244

Your BMW Sports Activity Vehicle Center
will be happy to answer detailed ques-

tions on BMW High Performance Synthetic Oil
or approved synthetic oils.
You can also call BMW of North America at
1-800-831-1117 or visit the website at
www.bmwusa.com to obtain this information.

Viscosity grades

Viscosity is a measure of an oil's flow rating and
is specified in SAE grades.
The choice of the right SAE grade is based on
the climatic conditions in the region in which
you normally drive your BMW.

Approved oils belong to the SAE grades
5W-40 and 5W-30.

These oils can be used for driving at all outside
temperatures.

Coolant

Do not add coolant to the cooling system
when the engine is hot. Escaping coolant

can cause burns.

<

Coolant is composed of equal parts water and a
coolant additive. Not all commercially available
additives are suitable for your BMW. Your BMW
Sports Activity Vehicle Center can recommend
suitable additives.

Only use suitable additives, otherwise
engine damage may result. The additives

present a health hazard; observe the instruc-
tions on the containers.

<

Comply with the appropriate environ-
mental protection regulations when dis-

posing of coolant additives.

<

Checking coolant level

1.

Do not open the hood until the engine has
cooled down.

2.

Turn the cap of the expansion tank counter-
clockwise to allow any accumulated pres-
sure to escape, then continue turning to
open.

3.

The coolant level is correct when the cool-
ant level is between the MIN and MAX
marks, refer to the diagram adjacent to the
filler neck.

4.

If the coolant is low, slowly add coolant up to
the specified level; do not overfill.

5.

Turn the cap until there is an audible click.

6.

Have the reason for the coolant loss elimi-
nated as soon as possible.

Online Edition for Part no. 01 41 0 014 248 - © 08/07 BMW AG

Advertising
This manual is related to the following products: