BMW 650i Convertible 2007 - Manual (Page 196)

BMW
Assis
t
194
Blocking services*
If you block the services, the connection to
BMW Assist is deactivated.
1. Press the button.
This opens the start menu.
2. Press the controller to open the menu.
3. Turn the controller until "Settings" is
selected and press the controller.
4. Turn the controller until "BMW Service set-
tings" is selected and press the controller.
5. Change to upper field if necessary. Turn the
controller until "Service Status" is selected
and press the controller.
6. Select "Options" and press the controller.
7. Select "Terminate services" and press the
controller.
The use of BMW Assist is blocked, and the cur-
rent vehicle position will not be transmitted dur-
ing an emergency call
* . To cancel blocking and
reactivate BMW Assist, see below. This does
not affect the contractual agreements.
Reactivate BMW Assist if necessary to log on
again.
Activating BMW Assist
For you to be able to use the services of
BMW Assist, BMW Assist must be activated.
Requirements
> Make sure that the vehicle can determine its
current position. Reception is best when
you have an unobstructed view to the sky.
> Leave radio readiness switched on while
connecting to the system.
Activating
1. Press the button.
This opens the start menu.
2. Press the controller to open the menu.
3. Turn the controller until "Settings" is
selected and press the controller.
Online Edition for Part no. 01 41 0 013 312 - © 02/07 BMW AG