BMW X5 3.0si SAV 2007 - Manual (Page 69)

Co
n
tr
o
ls
67
Re
fe
re
n
c
e
At
a
g
la
n
c
e
D
riv
in
g ti
ps
C
o
m
m
uni
ca
ti
o
n
s
Na
v
iga
ti
on
En
te
rt
a
in
m
e
n
t
M
o
bi
lity
Everything under control
Odometer, outside
temperature display, clock
1 Button in instrument cluster
2 Outside temperature display and clock
3 Odometer and trip odometer
Button in instrument cluster
> With ignition switched on
Press the button:
Resetting trip odometer
Press the button for approx. 5 seconds:
Displaying service requirements, refer to
page
71
> With ignition switched off
Press the button:
Briefly displaying time, outside temperature
and odometer
Units of measure
To set the corresponding unit of measure km or
miles for the odometer and for the outside tem-
perature
7 or 6, refer to page 79 .
The setting is stored for the remote control cur-
rently in use.
Time, date, outside temperature
display
From radio readiness the outside temperature
and the time are displayed.
To set the time, refer to page
77 .
Retrieving date
Press the button on turn signal lever upward;
the date appears.
To set the date, refer to page
78 .
Pressing the button upward or downward sev-
eral times changes the display between clock
and outside temperature display, date and
Check Control messages, refer to page
75 .
Outside temperature warning
If the display drops to +37 7/+36, a signal
sounds and a warning lamp lights up. A mes-
sage appears on the Control Display. There is
an increased danger of ice.
Even at temperatures above +37 7/
+3 6 ice can form. Therefore, drive care-
fully, e.g. on bridges and sections of road in the
shade, otherwise there is an increased accident
risk.
<
Odometer and trip odometer
Resetting trip odometer:
Press button
1 in the instrument cluster with
the ignition switched on.
When vehicle is parked
To briefly display the time, outside temperature
and mileage after the remote control has been
removed from the ignition lock:
Press button
1 in the instrument cluster.
Online Edition for Part no. 01 41 0 012 501 - © 08/06 BMW AG