BMW M5 Sedan 2007 User Manual

Page 207

Advertising
background image

M

o

bi

lity

205

Re

fe

re

n

c

e

At

a

g

la

n

c

e

Co

n

tr

o

ls

D

riv

in

g ti

ps

C

o

m

m

uni

ca

ti

o

n

s

Na

v

iga

ti

on

En

te

rt

a

in

m

e

n

t

value indicates the current oil level in liters
above Minimum.
After starting the engine, the last determined
value is displayed.
The oil level must be between the two marks.

Manual transmission: the engine oil level
will be shown in the lower display.

<

Exact measurement

The oil level is measured continuously while
driving or when stopped with the engine run-
ning.
The determination of a new value can take
30 minutes or longer.

If only dashes are shown in the display,
it was not possible to determine a new

value. This can, for example, be the case when
driving short distances or with a sporty driving
style.

<

Fast measurement

In addition to the continuous measurement, you
can also quickly determine the current oil level,
e.g. after adding engine oil, however with a low
measuring accuracy.

1.

With the engine at operating temperature,
i.e. after at least 6 miles/10 km of uninter-
rupted driving, park the vehicle in a horizon-
tal position.

2.

Allow the engine to run at idle.

3.

Press the BC button on the turn signal lever
repeatedly until the oil level display is
shown in the instrument cluster.

4.

Press the BC button on the turn signal lever
for at least 2 seconds.
The oil level is determined. A clock symbol
is displayed during the measurement.

5.

After approx. 1 minute the current oil level is
displayed.

If not all measuring conditions are met,
e.g. with the engine cold, "-.-" is dis-

played. The requested measurement is carried
out as soon as possible.

<

Possible displays

1 Oil level OK
2 Oil level at minimum:

Add a maximum of 1 US quart/1 liter of
engine oil at the next opportunity, refer to
Adding engine oil below

3 Oil level too high

Have the vehicle checked immedi-
ately, otherwise engine damage may

result if too much oil has been added.

<

4 Oil level at maximum
5 Fast measurement running: oil level is being

determined

6 No value can be determined at this time

Adding engine oil

Do not add oil until a value slightly above the
minimum of 0.0 US quarts/liters is displayed by
the oil level measurement. In this area a mes-
sage is also shown on the Control Display.

Add oil within the next 125 miles/200 km,
otherwise the engine could be damaged.

Add a maximum of 1 US quart/1 liter of oil, oth-
erwise the engine may be damaged by adding
too much oil.

ba8_m5us.book Seite 205 Montag, 5. Februar 2007 12:03 12

Online Edition for Part no. 01 41 0 013 310 - © 02/07 BMW AG

Advertising