Operation via idrive, Telep h oning – BMW 650i Coupe 2006 User Manual

Page 167

Advertising
background image

Telep

h

oning

166

5.

Select "Bluetooth" and press the controller.

6.

Select "Settings" and press the controller.

the Bluetooth link is activated.

7.

Select "Bluetooth communication active"
and press the controller to activate or deac-
tivate the link.

Adjusting volume

Turn the knob during a call to select the desired
volume.
This volume for the handsfree system is main-
tained, even if the other audio sources are set to
minimum volume.
You can also adjust the volume with buttons on
the steering wheel, refer to page

11

.

The setting is stored for the remote control cur-
rently in use.

Operation via iDrive

You can operate the following functions via
iDrive:

>

Dial the phone number.

>

Dial phone numbers from the phone book.

>

Select stored phone numbers, e.g. from the
list of accepted calls.

>

Hang up.

With the ignition and radio readiness switched
off, e.g. after removing the remote control, you
can continue an ongoing call for a maximum of
25 minutes via the handsfree system.

Requirements

The logon data of the mobile phone are stored
in the vehicle and the mobile phone is ready to
operate.
The engine is running or the ignition is switched
on.
The mobile phone is detected by the vehicle.
iDrive, for principle details, refer to page

16

.

1.

Press the

button.

This opens the start menu.

2.

Move the controller forward to open
"Communication".

Receiving calls

If you have the phone number of the caller
stored in the phone book and the phone num-
ber has been transmitted, the name of the entry
is displayed.

Online Edition for Part-No. 01 41 0 159 709 © 09/05 BMW AG

Advertising
This manual is related to the following products: