Indicator and warning lamps – BMW M3 Coupe 2006 User Manual

Page 20

Advertising
background image

20

Dynamic Stability Control
(DSC)

The indicator lamp flashes and

an acoustic signal sounds: the system
is active and governs drive and braking
force.
If the indicator lamp fails to go out after
the engine has been started, or if it
comes on during normal driving and
stays on:
DSC has been deactivated, either at the
button or in response to a system mal-
function.
If there is a malfunction, have the sys-
tem checked as soon as possible.
For additional information, refer to
page

82

.

Dynamic Brake Control (DBC)

Malfunction in DBC system.
Conventional braking efficiency

is available and unrestricted.
Have the system checked as soon as
possible.
For additional information, refer to
page

111

.

Dynamic Brake Control (DBC)
warning lamp for Canadian
models.

Add washer fluid
The washer fluid level is too low,
top it up at the earliest opportu-

nity.
For additional information, refer to
page

122

.

SERVICE ENGINE SOON

If the indicator lamp comes on
either continuously or intermit-

tently, this indicates a fault in the emis-
sions-related electronic systems.
Although the vehicle remains opera-
tional, you should have the systems
checked by your BMW center at the
earliest possible opportunity.
For additional information, refer to
page

128

.

Service Engine Soon indicator
lamp for Canadian models.

Engine electronics

There is a fault in the electronic
engine-management system.

You can continue to drive with reduced
engine output or engine speed. Please
have the system inspected at your
BMW center.

Add coolant
Coolant level too low, top up as
soon as possible.

For additional information, refer to
page

124

.

CHECK GAS CAP*

This indicator lamp comes on
when the gas cap is loose or

missing.
Close the gas cap tightly: refer to
page

25

.

Yellow: for your information

M Track mode
Lights up when M Track mode is
activated.

For additional information, refer to
page

83

.

Green: for your information

Turn signal indicator
Flashes when turn signals are
on. Rapid flashing: indicates a

system malfunction.
For additional information, refer to
page

71

.

Indicator and warning lamps

Online Edition for Part-No. 01 41 0 158 512 - © 09/04 BMW AG

Advertising
This manual is related to the following products: