Seat, mirror and steering wheel memory, Adju stmen ts – BMW 645Ci Coupe 2005 User Manual

Page 47

Advertising
background image

Adju

stmen

ts

46

Seat, mirror and steering

wheel memory

You can store and select three different adjust-
ment settings for the driver's seat, exterior mir-
rors and steering wheel.
The adjustment of the lumbar support is not
stored in the memory.

Storing

1.

Turn ignition key to position 1 or 2, refer to
page

54

.

2.

Adjust the desired seat, exterior mirror and
steering-wheel positions.

3.

Press the

button:

The indicator lamp in the button lights up.

4.

Press the desired memory button

1, 2 or 3:

The indicator lamp goes out.

Requesting

Do not request a position from the mem-
ory while the vehicle is moving. There is a

risk of accident from unexpected movement of
the seat or steering wheel.

<

Convenience mode

1.

Open the driver's door after unlocking or
turn the ignition key to position 1, refer to
page

54

.

2.

Briefly press the desired memory button

1,

2 or 3.

The system immediately cancels the adjust-
ment procedure when you briefly press one of
the seat adjustment switches or one of the
memory buttons.

The adjusting procedure for the steering wheel
is immediately interrupted if you operate the
switch for the steering wheel adjustment in any
direction, refer to page

50

.

Safety feature

1.

Close the driver's door and turn the ignition
key to position 0 or 2, refer to page

54

.

2.

Press the desired memory button

1, 2 or 3

and maintain pressure until the adjustment
process has been completed.

If the

button was pressed inadvertently:

Press the button again; the indicator lamp goes
out.

Position stored in key

The positions of the driver's seat, the external
rearview mirrors, and steering wheel are stored
for the remote key currently in use.
You can choose when the position is requested:

>

Request when unlocking vehicle

>

Request when opening driver's door

Control Center, for principle details, refer to
page

16

.

1.

Open the menu.

2.

Select "Vehicle settings" and press the
controller.

3.

Select "Door locks" and press the control-
ler.

4.

Select "Central locking" and press the con-
troller.

5.

Select "Last seat pos." and press the con-
troller.

6.

Select "After unlocking" or "After opening
door" and press the controller.

Online Edition for Part-No. 01 41 0 158 445 - © 09/04 BMW AG

Advertising
This manual is related to the following products: