Ent distances, refer to computer or trip computer – BMW 525i Sedan 2004 User Manual
Page 73
71
3.
Select "Car Data" and press the con-
troller.
You have two possibilities to display infor-
mation of the computer:
>
Computer
>
Trip computer
It is best to use this for driving on vaca-
tion, as when you reset the values to
zero, all the functions are reset together
and then restart.
Computer
Select "Onboard info" and press the con-
troller.
>
Estimated time of arrival at destination.
Manually enter a distance in the com-
puter or a destination in the navigation
system, see below or refer to page
>
Cruising range
>
Distance to destination.
Manually enter a distance in the com-
puter or a destination in the navigation
system, see below or refer to page
>
Average speed
>
Average fuel consumption.
Trip computer
Select "Trip computer" and press the con-
troller
>
Departure time
>
Driving time
>
Distance traveled
>
Average speed
>
Average fuel consumption.
To switch the trip computer on/off and
reset values to zero:
1.
Select "Set" and press the controller
2.
Select the desired menu item and press
the controller.
Entering a distance manually
Control Center, for principle details, refer to
page
1.
Open "Navigation".
On vehicles without navigation: open
"Car Data"
2.
Select "Car Data" and press the con-
troller
3.
Select "Onboard info" and press the
controller
4.
Select "Distance to destin." and press
the controller
5.
Turn the controller to select the dis-
tance to your destination
6.
Press the controller to apply the setting.
Online Edition for Part No. 01 41 0 157 647 - © 07/03 BMW AG