Rules and regulations, California proposition 65 warning, Obd connector – BMW 525i Sedan 2004 User Manual

Page 185

Advertising
background image

Mobility

183

Reference

At a glance

Controls

Driving tips

Communications

Navigation

Entertainment

Rules and regulations

California Proposition 65
Warning

California laws require us to issue the fol-
lowing warning:

Engine exhaust and a wide variety of
automobile components and parts,

including components found in the interior
furnishings in a vehicle, contain or emit
chemicals known to the State of California
to cause cancer and birth defects and
reproductive harm. In addition, certain flu-
ids contained in vehicles and certain prod-
ucts of component wear contain or emit
chemicals known to the State of California
to cause cancer and birth defects or other
reproductive harm.
Battery posts, terminals and related acces-
sories contain lead and lead compounds.
Wash your hands after handling.
Used engine oil contains chemicals that
have caused cancer in laboratory animals.
Always protect your skin by washing
thoroughly with soap and water.

<

OBD connector

The Onboard Diagnostic OBD interface
socket is located on the left of the driver's
side under the instrument panel and under
a cover.
The cover has the letters OBD on it.

The purpose of the OBD system is to
ensure proper operation of the emission
control system for the vehicle's lifetime.

The system monitors emissions-related
components and systems for deterioration
and malfunction.

An illuminated indicator lamp
informs you of the need for service,
not of the need to stop the vehicle.

However, the systems should be checked
by your BMW center at the earliest possible
opportunity.

Indicator lamp for Canadian mod-
els.

Under certain conditions, the indicator will
blink or flash. This indicates a rather severe
level of engine misfire. When this occurs,
you should reduce speed and consult the
nearest BMW center as soon as possible.
Severe engine misfire over only a short
period of time can seriously damage emis-
sions control components, especially the
catalytic converter.

When the

fuel filler cap is not properly

tightened, the OBD system can

detect the vapor leak and the indicator
lamp will light up. If the filler cap is subse-
quently tightened, the indicator lamp
should go out within a few days.

<

Online Edition for Part No. 01 41 0 157 647 - © 07/03 BMW AG

Advertising
This manual is related to the following products: