BMW Z4 Roadster 2.5i 2004 - Manual (Page 32)

Adjustments
30
Safety function
1. Close the driver's door and turn the
ignition key to position 0 or 2
2. Press and hold the desired memory
button 1, 2 or 3 until the adjustment
process is completed.
If you press the M EMORY button acciden-
tally:
Press the button again; the indicator lamp
goes out.
Seat heating*
The seat cushion and backrest can be
heated with the ignition key in position 2.
You can call up different heating modes by
repeatedly pressing the buttons.
The seat heating can also be switched off
from the higher heating modes:
Press the button and hold it slightly longer.
Safety belts
To close
Make sure you hear the lock engage in the
belt buckle.
The warning lamp in the instrument
cluster lights up for a few seconds
or until the safety belts have been
fastened. Depending on the vehicle ver-
sion, an acoustic signal
* sounds at the
same time.
To unlock the safety belt
1. Press the red button in the belt buckle
2. Hold the belt
3. Guide the belt back into its reel.
The upper belt attachment point is suitable
for all body sizes provided that the person
is sitting correctly, refer to page
28 .
Damaged safety belts
If the safety belts are damaged or
stretched in an accident: have the
entire belt system, including the tensioning
mechanisms, replaced at your BMW cen-
ter. Have the belt anchorage points
inspected for damage at the same time.
Failure to observe this precaution may pre-
vent the safety belts from effectively pro-
viding optimal protection when needed.
<
Steering wheel
Adjustments
Never attempt to adjust the steering
wheel while driving the vehicle. It
could respond with unexpected move-
ment, posing a potential accident hazard.
<
1. Push the locking lever downward
2. Adjust the steering column's reach and
height to suit your seat position
3. Pull the lever back in.
Online Version for Part No. 01 41 0 157 498 - © 10/03 BMW AG