Service interval display, Outside temperature, Clock – BMW Z4 Roadster 2.5i 2004 User Manual

Page 51: Setting time, Service interval

Advertising
background image

Reference

At a glance

Controls

Driving tips

Mobility

49

Between the blue and red zones

Normal operating range. The needle may
rise as far as the edge of the red sector dur-
ing normal operation.

Red

When you switch on the ignition, warning
lamp 1 comes on briefly to indicate an
operational check.

Comes on while driving:
The engine has overheated. Stop and
switch the engine off immediately and
allow it to cool down.

For checking the coolant level, refer to
page

84

.

Service interval display

Remaining distance to next service

The displays shown in the illustration
appear for a few seconds when the ignition
key is in position 1 or after the engine is
started.

The next service due appears with the
message OIL SERVICE or INSPECTION,
together with the distance remaining in
miles – in kilometers in Canada – before the
next scheduled service.
The computer bases its calculations of the
remaining distance on the preceding driv-
ing style.

A flashing message and a minus sign in
front of the number mean that the service
interval has already been exceeded by the
distance shown on the display. Please con-
tact your BMW center for an appointment.

Outside temperature

If the vehicle is not equipped with a com-
puter, the display in the instrument cluster
always shows the outside temperature.

Clock

If you wish to have a permanent time dis-
play, you can have it appear in the car radio
display, refer to the Owner's Manual for
Radio.

You can set the clock and the time display
in the car radio as follows.

To set

Ignition key in position 1 or higher:

Hours

1.

Keep button 2 pressed for several sec-
onds until the hours are displayed and
the colon flashes

2.

Press button 1 repeatedly until the
required hour is set

Minutes

3.

Press button 2 to switch to the minutes
display

Online Version for Part No. 01 41 0 157 498 - © 10/03 BMW AG

Advertising
This manual is related to the following products: