FORD 2015 Transit v.1 - Manual (Page 310)

Pairing Subsequent Cell Phones
Press the phone button, then scroll to:
Action Message
Press the OK button. Phone settings
Press the OK button. Bluetooth Devices
Press the OK button. When the following message appears
in the display. Add Device
Find SYNC 1. Press the OK button.
2. Put your cell phone into Bluetooth discovery mode. See
your device's manual if necessary.
3. When prompted on your cell phone's display, enter the
six-digit PIN provided by SYNC in the radio display. The
display indicates when the pairing is successful.
The system then prompts with questions, such as if you would like to set the current cell
phone as the primary cell phone (the cell phone SYNC automatically tries to connect
with first upon vehicle start-up) or download your phonebook.
Note: Make sure to switch on the ignition and the radio. Put the transmission in position
park (P) (automatic transmission) or neutral with the parking brake applied (manual
transmission).
Note: To scroll through the menus, press the up and down arrows on your audio system.
Phone Voice Commands
Action Voice Command
You do not need to preceed this command by saying; phone. call (someone | [[a]
name])
This command is not available until your cell phone informa-
tion is completely downloaded using Bluetooth.
You do not need to preceed this command by saying; phone. Call [name] at home
This command is not available until your cell phone informa-
tion is completely downloaded using Bluetooth.
You do not need to preceed this command by saying; phone. Call [name] at work
This command is not available until your cell phone informa-
tion is completely downloaded using Bluetooth.
You do not need to preceed this command by saying; phone. Call [name] at office
This command is not available until your cell phone informa-
tion is completely downloaded using Bluetooth.
307
Transit (TTH) Canada/United States of America, enUSA, Edition date: 03/2014
SYNC™