Keys and remote controls – FORD 2014 Escape v.2 User Manual

Page 48

Advertising
background image

Integrated Keyhead Transmitter

E138619

1.

Twist a thin coin in the slot of the
transmitter near the key ring to remove
the battery cover.

2. Remove the old battery.

E138620

3. Insert the new battery. Refer to the

instructions inside the transmitter for
the correct orientation of the battery.
Press the battery down to make sure
it is fully in the housing.

4. Snap the battery cover back onto the

transmitter.

Intelligent Access Transmitter

1.

Remove the backup key from the
transmitter.

E142432

2. Twist a thin coin under the tab hidden

behind the backup key head to remove
the battery cover. Do not use the
backup key to remove the cover or you
could damage the intelligent access
key.

E138622

3. Remove the old battery.

4. Insert a new battery with the + facing

downward. Press the battery down to
make sure it is fully in the housing.

5. Snap the battery cover back onto the

transmitter and install the backup key.

Car Finder

E138623

Press the button twice within
three seconds. The horn will
sound and the turn signals will

flash. We recommend you use this method
to locate your vehicle, rather than using
the panic alarm.

45

Escape/Kuga (TM2)

Keys and Remote Controls

Advertising