Wheels and tires – FORD 2014 F-150 Raptor v.3 User Manual

Page 272

Advertising
background image

Traction AA A B C

WARNING

The traction grade assigned

to this tire is based on

straight-ahead braking traction
tests, and does not include
acceleration, cornering,
hydroplaning or peak traction
characteristics

The traction grades, from highest
to lowest are AA, A, B, and C. The
grades represent the tire’s ability
to stop on wet pavement as
measured under controlled

conditions on specified

government test surfaces of

asphalt and concrete. A tire
marked C may have poor traction

performance.

Temperature A B C

WARNING

The temperature grade for

this tire is established for a

tire that is properly inflated and

not overloaded. Excessive speed,

underinflation, or excessive
loading, either separately or in

combination, can cause heat
buildup and possible tire failure.

The temperature grades are A

(the highest), B and C,
representing the tire’s resistance
to the generation of heat and its
ability to dissipate heat when
tested under controlled conditions
on a specified indoor laboratory

test wheel. Sustained high

temperature can cause the

material of the tire to degenerate

and reduce tire life, and excessive
temperature can lead to sudden
tire failure. The grade C
corresponds to a level of
performance which all passenger
car tires must meet under the
Federal Motor Vehicle Safety
Standard No. 139. Grades B and A
represent higher levels of
performance on the laboratory
test wheel than the minimum
required by law.

Glossary of Tire Terminology

*Tire label: A label showing the
original equipment tire sizes,

recommended inflation pressure

and the maximum weight the

vehicle can carry.
*Tire Identification Number

(TIN): A number on the sidewall

of each tire providing information
about the tire brand and

manufacturing plant, tire size and

date of manufacture. Also referred

to as DOT code.
*Inflation pressure: A measure

of the amount of air in a tire.

269

F150 (TF6) , enUSA

Wheels and Tires

Advertising
This manual is related to the following products: