FORD 2014 Transit Connect v.1 - Manual (Page 200)

Capacity Item
0.8 qt (0.75 L) Engine oil top-up - raise the level on the dipstick
from minimum to maximum 2, 3
1.8 qt (1.7 L)
Transmission 4, 5
16.4 gal (62 L) Fuel tank
2.6 qt (2.5 L) Windshield and rear window washer system -
including headlamp washer
1.5 lb (0.68 kg) A/C Refrigerant
4.6fl oz (136 ml) A/C Refrigerant Compressor Oil
1 Add the coolant type originally used in your vehicle.
2 Your vehicle engine has been designed to use Motorcraft engine oils or equivalent oils
that meet Ford oil specifications. Motor oils of the recommended viscosity grade that
meet API SN requirements and display the API Certification Mark for gasoline engines
are also acceptable.
3 Do not use oil labeled with API SN service category unless the label also displays the API
certification mark. This oil does not meet the requirements of your vehicle engine and
emissions system.
4 Automatic transmissions that require Motorcraft MERCON LV transmission fluid should
only use Motorcraft MERCON LV transmission fluid. Use of any fluid other than the
recommended fluid may cause transmission damage.
5 Change the automatic transmission fluid and filter at the correct service interval. See
Scheduled Maintenance (page 372).
Specifications
Materials
Specification Name
WSS-M2C945-A Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor
Oil
XO-5W20-QSP
WSS-M2C200-D2 Motorcraft® Dual Clutch Transmission Fluid
XT-11-QDC
WSS-M97B44-D2 Motorcraft® Orange Antifreeze/Coolant Prediluted
VC-3DIL-B
WSS-M6C65-A2 Motorcraft® DOT 4 LV High Performance Motor Vehicle
Brake Fluid
PM-20
197
Tourneo Connect/Transit Connect (CHC) Canada/United States of America
Maintenance