FORD 2013 Edge v.2 - Manual (Page 357)

Normal Scheduled Maintenance *
At every oil change
interval as indicated by
the message center Change engine oil and filter. **
Rotate tires, inspect tire wear and measure
tread depth.
Perform multi-point inspection
(recommended).
Inspect automatic transmission fluid level (if
equipped with dipstick). Consult dealer for
requirements.
Inspect brake pads, shoes, rotors, drums,
brake linings, hoses and parking brake.
Inspect cabin air filter (if equipped).
Inspect engine cooling system strength and
hoses.
Inspect exhaust system and heat shields.
Inspect rear axle and U-joints. Lubricate if
equipped with grease fittings (AWD vehicles).
Inspect half-shaft boots.
Inspect steering linkage, ball joints,
suspension, tie-rod ends, driveshaft and
U-joints. Lubricate if equipped with grease
fittings.
Inspect wheels and related components for
abnormal noise, wear, looseness or drag.
* Do not exceed one year or 10000 miles (16000 kilometers) between
service intervals.
** Reset your Intelligent Oil Life Monitor
௡ after each engine oil and filter
change; refer to the Instrument Cluster chapter.
Scheduled Maintenance 357
2013 Edge (edg)
Owners Guide gf, 2nd Printing
USA (fus)