Cleaning leather seats, Cleaning the alloy wheels, Cleaning leather seats cleaning the alloy wheels – FORD 2013 Escape v.3 User Manual

Page 249: Vehicle care

Advertising
background image

4. Remove the soaked cloth and if it is not

soiled badly, use this cloth to clean the
area by using a rubbing motion for 60
seconds.

5. Following this, wipe area dry with a

clean, white, cotton cloth.

CLEANING LEATHER SEATS

(IF

EQUIPPED)

For routine cleaning, wipe the surface with
a soft, damp cloth. For more thorough
cleaning, wipe the surface with a mild soap
and water solution. Dry the area with a soft
cloth. In Canada, use Motorcraft® Vinyl
Cleaner.

If the leather cannot be completely
cleaned using a mild soap and water
solution, the leather may be cleaned using
a commercially available leather cleaning
product designed for automotive interiors.

Note: To check for compatibility, first test
any cleaner or stain remover on an
inconspicuous part of the leather.

You should:

•

remove dust and loose dirt with a
vacuum cleaner.

•

clean spills and stains as quickly as
possible.

•

To check for compatibility, first test any
cleaner or stain remover on an
inconspicuous part of the leather.

Do not use the following products as these
may damage the leather:

•

oil/petroleum-based leather
conditioners.

•

household cleaners.

•

alcohol solutions.

•

solvents or cleaners intended for
rubber, vinyl and plastics.

CLEANING THE ALLOY
WHEELS

(IF EQUIPPED)

Note: Do not apply a cleaning chemical to
warm or hot wheel rims and covers.

Note: Some automatic car washes may
cause damage to the finish on your wheel
rims and covers.

Note: Industrial-strength or heavy-duty
cleaners in combination with brush agitation
to remove brake dust and dirt, could wear
away the clear coat finish over a period time.

Note: Do not use hydrofluoric acid-based
or high caustic-based wheel cleaners, steel
wool, fuels or strong household detergents.

Note: If you intend parking your vehicle for
an extended period after cleaning the
wheels with a wheel cleaner, drive your
vehicle for a few minutes before doing so.
This will reduce the risk of increased
corrosion of the brake discs.

Alloy wheels and wheel covers are coated
with a clear coat paint finish. To maintain
their condition we recommend that you:

•

Clean the wheels weekly, with the
recommended Ford service wheel and
tire cleaner. Apply using
manufacturer's instructions. Use
Motorcraft® Wheel and Tire Cleaner.
See cleaning products (page ?).

•

Use a sponge to remove heavy
deposits of dirt and brake dust
accumulation.

•

Rinse thoroughly with a strong stream
of water when you have completed the
cleaning process.

•

To remove tar and grease, use
Motorcraft® Bug and Tar Remover. See
cleaning products (page ?).

246

Vehicle Care

Advertising