FORD 2013 Explorer v.1 User Manual
Page 201
Advertising
The power point can switch to a fault mode when it is overloaded,
overheated, or shorted. Unplug your device and turn the ignition off then
on for overloading and shorting conditions. Let the system cool off, then
turn the ignition off then on for an overheating condition.
The power point can provide power whenever the ignition is on and the
green indicator light is on. The indicator light is located in the top left
corner of the power point.
When the green light is:
• on — power point is ready to supply power
• off — power point power supply is off; ignition is not on
• blinking — power point is in fault mode
Auxiliary Power Points
201
2013 Explorer (exp)
Owners Guide gf, 1st Printing
USA (fus)
Advertising