FORD 2013 Mustang v.1 - Manual (Page 30)

Perform the following steps to attach a child safety seat to the tether anchor:
1. Route the tether strap as follows:
• For coupe with rear seats: Route the tether strap over the top of
the head restraint.
• For coupe without rear seats:
Route the tether strap through
the inboard slot of the front
passenger seat back or route the
tether strap over the top of the
seat. A tether strap extension
may be needed to reach the
tether anchor.
2. Locate the correct anchor for the
selected seating position.
3. Open the tether anchor cover.
4. Clip the tether strap to the
anchor as shown.
If the tether strap is clipped
incorrectly, the child safety seat may
not be retained properly in the
event of a collision.
5. Tighten the child safety seat tether strap according to the
manufacturer’s instructions.
If the safety seat is not anchored properly, the risk of a child being
injured in a collision greatly increases.
30 Child Safety
2013 05+ Mustang (197)
Owners Guide gf, 1st Printing
USA (fus)