FORD 2013 Taurus v.1 - Manual (Page 167)

The heated seats only operate when the ignition is on. To operate the
heated seats:
• Press the indicated side of the control for maximum
heat.
• Press again to deactivate.
• Press the indicated side of the control for minimum heat.
• Press again to deactivate.
The heated seat module resets at every ignition run cycle. While the
ignition is in the on position, activating the high or low heated seat
switch enables heating mode. When activated, they will turn off
automatically when the engine is turned off.
The indicator light will illuminate when the heated seats have been
activated.
Seats 167
2013 Taurus
Owners Guide gf, 1st Printing
USA (fus)