Driving – FORD 2012 E-450 User Manual

Page 194

Advertising
background image

The AdvanceTrac

௡ with RSC௡

system includes a TCS OFF button
on the center of the instrument
panel, a stability control light and a
TCS OFF light in the instrument
cluster. The stability control light in
the instrument cluster will
illuminate temporarily during start-up as part of a normal system
self-check, or during driving if a driving situation causes the
AdvanceTrac

௡ with RSC௡ system to operate. If the stability control light

and TCS OFF light illuminate steadily, verify that the AdvanceTrac

௡ with

RSC

௡ system is not manually disabled by pressing the TCS OFF button

located on the center stack of the instrument panel. If the stability
control light and TCS OFF light remain steadily illuminated, or if the
message center (if equipped) displays SERVICE RSC NOW, have the
system serviced by an authorized dealer immediately.

When AdvanceTrac

௡ with RSC௡ performs a normal system self-check,

some drivers may notice a slight movement of the brake, and/or a
rumble, grunting, or grinding noise after startup and when driving off.

When an event occurs that activates AdvanceTrac

௡ with RSC௡ you may

experience the following:
• A slight deceleration of the vehicle
• The stability control light will flash.
• A vibration in the pedal when your foot is on the brake pedal
• If the driving condition is severe and your foot is not on the brake, the

brake pedal may move as the systems applies higher brake forces. You
may also hear a whoosh of air from under the instrument panel during
this severe condition.

• The brake pedal may feel stiffer than usual.
Traction control system (TCS)

Traction control is a driver aid feature that helps your vehicle maintain
traction of the wheels, typically when driving on slippery and/or hilly
road surfaces, by detecting and controlling wheel spin.

Excessive wheel spin is controlled in two ways, which may work
separately or in tandem; engine traction control and brake traction
control. Engine traction control works to limit drive-wheel spin by
momentarily reducing engine power. Brake traction control works to limit
wheel spin by momentarily applying the brakes to the wheel that is
slipping. Traction control is most active at low speeds.

Driving

194

2012 Econoline (eco)
Owners Guide, 1st Printing
USA
(fus)

Advertising
This manual is related to the following products: