FORD 2012 Expedition v.2 - Manual (Page 118)

Note: For all vehicles with remote start installed, it is possible to
program all original vehicle keys as MyKeys
௡, in which case, you will
need to use your remote start system to reset all MyKeys
௡ as admin keys
by doing the following:
1. Enter the vehicle, close all doors.
2. Remote start the vehicle using your remote start fob.
3. Follow Steps 1-4 in the Clear MyKey
௡ section.
Troubleshooting
Condition Potential Causes
Can’t create a MyKey
௡ • Key in the ignition is already a
MyKey
௡
• Key in the ignition is the last
remaining admin key (there always
has to be at least one admin key)
• SecuriLock௡ passive anti-theft
system is disabled or in unlimited
mode
• Vehicle has been started using a
remote start system that is
programmed as MyKey
௡. Refer to
Using MyKey
௡ with remote start
systems section.
Cannot program the MyKey
௡
optional settings
• Key in the ignition is a MyKey௡
• No MyKeys௡ are programmed to the
vehicle. Refer to Create a MyKey
௡
section
• Vehicle has been started using a
remote start system that is
programmed as MyKey
௡. Refer to
Using MyKey
௡ with remote start
systems section.
Locks and Security
118
2012 Expedition (exd)
Owners Guide, 3rd Printing
USA (fus)