Second row heated seats (if equipped), Seating and safety restraints – FORD 2012 Flex v.2 User Manual

Page 163

Advertising
background image

WARNING: Do not adjust or release the seat floor latch while
vehicle is in motion. Do not operate the vehicle with seats in

tumbled position. Always latch the vehicle seat to the floor, whether
the seat is occupied or empty. If not latched or if the seat is tumbled,
the seat may cause injury during a sudden stop.

Second row heated seats (if equipped)

WARNING: Persons who are unable to feel pain to the skin
because of advanced age, chronic illness, diabetes, spinal cord

injury, medication, alcohol use, exhaustion, or other physical
conditions, must exercise care when using the seat heater. The seat
heater may cause burns even at low temperatures, especially if used
for long periods of time. Do not place anything on the seat that
insulates against heat, such as a blanket or cushion, because this may
cause the seat heater to overheat. Do not puncture the seat with pins,
needles, or other pointed objects because this may damage the heating
element which may cause the seat heater to overheat. An overheated
seat may cause serious personal injury.

Note: Do not do the following:
• Place heavy objects on the seat
• Operate the seat heater if water or any other liquid is spilled on the

seat. Allow the seat to dry thoroughly.

To operate the heated seats:
• Press the button located on the

rear of the floor console once to
activate high heat.

• Press twice to activate low heat.
• Press a third time to deactivate.
The indicator light on the control will illuminate when activated. For low
heat, one light will be lit; for high heat, both lights will be lit.

Seating and Safety Restraints

162

2012 Flex (471)
Owners Guide, 2nd Printing
USA
(fus)

Advertising
This manual is related to the following products: