Fog lamp control (if equipped), High beams, Flash-to-pass – FORD 2012 Focus v.1 User Manual

Page 123: Daytime running lamps (drl) (if equipped), Lights

Advertising
background image

Fog lamp control (if equipped)

The fog lamps can be turned on
when the headlamp control is in

the

,

, or

positions

and the high beams are not turned
on.
• Press the fog lamp control,

located on the instrument panel,
to activate the fog lamps.

• Press the fog lamp control again

to deactivate the fog lamps.

Note: The fog lamp indicator will illuminate when the fog lamps are
activated.

High beams
• Push the lever toward the

instrument panel to activate.

• Push the lever toward the

instrument panel again or pull the
lever towards you to deactivate.

Flash-to-pass

Pull toward you slightly to activate
and release to deactivate.

Daytime running lamps (DRL) (if equipped)

Turns the headlamps on with a reduced output.

To activate:
• the ignition must be in the on position and
• the headlamp control is in the off or parking lamp position.

Lights

123

2012 Focus (foc)
Owners Guide, 1st Printing
USA
(fus)

Advertising