One-touch up or down (all windows) (if equipped), Bounce-back (if equipped), Overriding the bounce-back feature – FORD 2012 Focus v.4 User Manual

Page 138: Driver controls

Advertising
background image

Press and pull the window switches
to open and close windows.
• Press down (to the first detent)

and hold the switch to open.

• Pull up (to the first detent) and

hold the switch to close.

Rear Window Buffeting: When one or both of the rear windows are
open, the vehicle may demonstrate a wind throb or buffeting noise. This
noise can be alleviated by lowering a front window approximately
2–3 inches (5–8 cm).

One-touch down (driver’s window only) (if equipped)

This feature allows the driver’s window to open fully without holding the
control down.

To operate one-touch down, press the switch completely down to the
second detent and release quickly. The window will open fully.
Momentarily press the switch to any position to stop the window
operation.

One-touch up or down (all windows) (if equipped)

This feature allows the windows to open or close fully without holding
the control down.

To operate one-touch down, press the switch completely down to the
second detent and release quickly. The window will open fully.
Momentarily press the switch to any position to stop the window
operation.

To operate one-touch up, pull the switch completely up to the second
detent and release quickly. The window will close fully. Momentarily
press the switch to any position to stop the window operation.

Bounce-back (if equipped)

When an obstacle has been detected in the window opening as the
window is moving upward, the window will automatically move down
until the bounce-back position is reached.

Overriding the bounce-back feature

To override this protection function when there is a resistance, e.g. in
the winter, proceed as follows:

1. Close the window twice until it reaches the resistance and let it
reverse.

Driver Controls

138

2012 Focus (foc)
Owners Guide, 4th Printing
USA
(fus)

Advertising