Fog lamp control (if equipped), High beams, Flash-to-pass – FORD 2012 Focus v.5 User Manual

Page 121: Daytime running lamps (drl) (if equipped), Lights

Advertising
background image

Fog lamp control (if equipped)

The fog lamps can be turned on
when the headlamp control is in

the

,

, or

positions

and the high beams are not turned
on.
• Press the fog lamp control,

located on the instrument panel,
to activate the fog lamps.

• Press the fog lamp control again

to deactivate the fog lamps.

Note: The fog lamp indicator will illuminate when the fog lamps are
activated.

High beams
• Push the lever toward the

instrument panel to activate.

• Push the lever toward the

instrument panel again or pull the
lever towards you to deactivate.

Flash-to-pass

Pull toward you slightly to activate
and release to deactivate.

Daytime running lamps (DRL) (if equipped)

Turns the headlamps on with a reduced output.

To activate:
• the ignition must be in the on position and
• the headlamp control is in the off or parking lamp position.

Lights

121

2012 Focus (foc)
Owners Guide, 5th Printing
USA
(fus)

Advertising
This manual is related to the following products: