Engine oil, Checking the engine oil, Maintenance and specifications – FORD 2012 Focus v.5 User Manual

Page 342

Advertising
background image

3. To attach the new wiper to the
wiper arm, align the slot (1) and
cross pin (2) and firmly press the
wiper arm into the wiper blade until
a click is heard.

If you find this procedure too difficult, please see your dealer.

ENGINE OIL

Checking the engine oil

Refer to the scheduled maintenance information for the appropriate
intervals for checking the engine oil.

1. Make sure the vehicle is on level ground.

2. Turn the engine off and wait 15 minutes for the oil to drain into the
oil pan.

3. Set the parking brake and ensure the gearshift is securely latched in P
(automatic transmission) or 1st (manual transmission).

4. Open the hood. Protect yourself from engine heat.

5. Locate and carefully remove the engine oil level dipstick.

6. Wipe the dipstick clean. Insert the dipstick fully, then remove it again.

7. Put the dipstick back in and ensure it is fully seated.
• If the oil level is within this

range, the oil level is acceptable.
DO NOT ADD OIL.

• If the oil level is below this

mark, engine oil must be added
to raise the level within the
normal operating range.

• If required, add engine oil to the engine. Refer to Adding engine oil

in this chapter.

2

1

Maintenance and Specifications

342

2012 Focus (foc)
Owners Guide, 5th Printing
USA
(fus)

Advertising
This manual is related to the following products: