Instrument cluster – FORD 2012 Fusion v.3 User Manual

Page 22

Advertising
background image

OIL LIFE

This displays the remaining oil life.

An oil change is required whenever indicated by the message center and
according to the recommended maintenance schedule. USE ONLY
RECOMMENDED ENGINE OILS.

To reset the oil monitoring system to 100% after each oil change,
perform the following:

1. Press and release SETUP to display “OIL LIFE XXX% HOLD RESET =
NEW”.

2. Press and hold RESET for two seconds and release to reset the oil life
to 100%.

UNITS

Displays the current units English or Metric.

Press RESET to change from English to Metric.

AUTOLAMP (SEC)

This feature keeps your headlights on for up to three minutes after the
ignition is switched off.

Press RESET to select the new Autolamp delay values of 0, 10, 20, 30,
60, 90, 120 or 180 seconds.

AUTOLOCK

This feature automatically locks all vehicle doors when the vehicle is
shifted into any gear, putting the vehicle in motion.

Press RESET to turn autolock on or off.

AUTOUNLOCK

This feature automatically unlocks all vehicle doors when the driver’s
door is opened within 10 minutes of the ignition being turned off.

Press RESET to turn autounlock on or off.

BLIND SPOT (if equipped)

The Blind Spot Information System (BLIS

௡) is designed to assist the

driver by monitoring the side areas on both sides of the vehicle.

Press RESET to turn it off or on.

Instrument Cluster

22

2012 Fusion (fsn)
Owners Guide, 3rd Printing
USA
(fus)

Advertising
This manual is related to the following products: