Replacing backup lamp bulbs, Lights – FORD 2012 Taurus v.2 User Manual

Page 73

Advertising
background image

Replacing rear brake/tail/turn and sidemarker lamp bulbs

The brake/tail/turn and side marker lamp bulbs are located in the tail
lamp assembly. Follow the same steps to replace either bulb.
• (1) Tail/side marker lamp
• (2) Brake/tail lamp
• (3) Turn signal lamp

1. Make sure the headlamp switch is in the off position and open the
trunk.

2. Remove the press pin and cargo
net fastener (if equipped) and
carefully pull the carpet away to
expose the backside of the tail lamp
assembly.

3. Remove the nut and washer
assemblies, then pull the lamp
assembly away from the vehicle.

4. Remove the bulb socket by
rotating it counterclockwise, then
pulling it out of the lamp assembly.

5. Pull the bulb straight from the
socket.

Install new bulb(s) in reverse order.

Replacing backup lamp bulbs

The backup lamp bulbs are located in the deck lid assembly.

1. Make sure the headlamp switch is in the off position.

Lights

73

2012 Taurus
Owners Guide, 2nd Printing
USA
(fus)

Advertising
This manual is related to the following products: