Daytime running lamps (drl) (if equipped), Panel dimmer control, Lights – FORD 2011 E-450 v.3 User Manual

Page 52

Advertising
background image

Daytime running lamps (DRL) (if equipped)

Turns the headlamps on with a reduced output.

To activate:
• the ignition must be in the on position and
• the headlamp control is in the off or parking lamp position.

WARNING: Always remember to turn on your headlamps at
dusk or during inclement weather. The Daytime Running Lamp

(DRL) system does not activate the tail lamps and generally may not
provide adequate lighting during these conditions. Failure to activate
your headlamps under these conditions may result in a collision.

PANEL DIMMER CONTROL

Use to adjust the brightness of the
instrument panel and all applicable
switches in the vehicle during
headlamp and parking lamp
operation.
• Move the control up or down to

adjust the intensity of the panel
lighting.

• Move the control to the full

upright position, past detent, to
turn on the interior lamps.

Note: If the battery is disconnected, discharged, or a new battery is
installed, the dimmer switch requires re-calibration. Rotate the dimmer
switch from the full dim position to the full dome/on position to reset.
This will ensure that your displays are visible under all lighting
conditions.

The dome lamp will not illuminate if the control switch is not rotated
past the detent.

Lights

52

2011 Econoline (eco)
Owners Guide, 3rd Printing
USA
(fus)

Advertising
This manual is related to the following products: