Driving, Starting, Positions of the ignition – FORD 2011 E-450 v.3 User Manual

Page 186: Preparing to start your vehicle

Advertising
background image

STARTING

Positions of the ignition

1. Accessory — allows the electrical
accessories such as the radio to
operate while the engine is not
running.

2. Lock — locks the automatic
transmission gearshift lever and
allows key removal.

3. Off — shuts off the engine and all
accessories without locking the
steering wheel.

4. On — all electrical circuits operational. Warning lights illuminated. Key
position when driving.

5. Start — cranks the engine. Release the key as soon as the engine
starts.

Preparing to start your vehicle

Engine starting is controlled by the powertrain control system.

This system meets all Canadian interference-causing equipment standard
requirements regulating the impulse electrical field strength of radio
noise.

When starting a fuel-injected engine, don’t press the accelerator before
or during starting. Only use the accelerator when you have difficulty
starting the engine. For more information on starting the vehicle, refer to
Starting the engine in this chapter.

WARNING: Extended idling at high engine speeds can produce
very high temperatures in the engine and exhaust system,

creating the risk of fire or other damage.

WARNING: Do not park, idle, or drive your vehicle in dry grass
or other dry ground cover. The emission system heats up the

engine compartment and exhaust system, which can start a fire.

3

1

2

5

4

Driving

186

2011 Econoline (eco)
Owners Guide, 3rd Printing
USA
(fus)

Advertising
This manual is related to the following products: