Panel dimmer control, Aiming the headlamps, Lights – FORD 2011 Edge v.1 User Manual

Page 77

Advertising
background image

PANEL DIMMER CONTROL

Use to adjust the brightness of the
instrument panel and all applicable
lit components in the vehicle during
headlamp and parking lamp
operation.
• Tap the top or bottom of the

control to brighten/dim all interior
lit components incrementally, or

• Press and hold the top or bottom

of the control until the desired lighting level is reached.

Note: If the battery is disconnected, discharged, or a new battery is
installed, the dimmer control requires re-calibration. Press the dimmer
control from the full dim position to the full on position to reset. This
will ensure that your displays are visible under all lighting conditions.

Dome lamp control

Use to manually turn the dome lamp
on.
• Press the control. This will turn

on the interior courtesy lights.
The lights will remain on until the
control is pressed again.

AIMING THE HEADLAMPS

The headlamps on your vehicle are properly aimed at the assembly plant.
If your vehicle has been in an accident the alignment of your headlamps
should be checked by your authorized dealer.

Lights

77

2011 Edge (edg)
Owners Guide, 1st Printing
USA
(fus)

Advertising