Safety chains, Trailer brakes, Trailer lamps – FORD 2011 Escape v.1 User Manual

Page 202: Driving while you tow, Tires, wheels and loading

Advertising
background image

Safety chains

Always connect the trailer’s safety chains to the hook retainers on the
vehicle. To connect the trailer’s safety chains, cross the chains under the
trailer tongue and allow slack for turning corners.

If you use a rental trailer, follow the instructions that the rental agency
gives to you.

Do not attach safety chains to the bumper.

Trailer brakes

Electric brakes and manual, automatic or surge-type trailer brakes are
safe if installed properly and adjusted to the manufacturer’s
specifications. The trailer brakes must meet local and Federal
regulations.

WARNING: Do not connect a trailer’s hydraulic brake system
directly to your vehicle’s brake system. Your vehicle may not

have enough braking power and your chances of having a collision
greatly increase.

The braking system of the tow vehicle is rated for operation at the
GVWR not GCWR.

Trailer lamps

Trailer lamps are required on most towed vehicles. Make sure all running
lights, brake lights, turn signals and hazard lights are working. Do not
connect trailer lamps directly to your vehicle’s tail lamps. This can cause
damage to your vehicle’s electrical system. Contact your authorized
dealer or trailer rental agency for proper instructions and equipment for
hooking-up trailer lamps.

WARNING: Never connect any trailer lighting to the vehicle’s
tail lamp circuits, because it may damage the electrical system

resulting in fire. Contact your authorized dealer as soon as possible for
assistance in proper trailer tow wiring installation. Additional electrical
equipment may be required.

Driving while you tow

When towing a trailer:
• Do not drive faster than 70 mph (113 km/h) during the first 500 miles

(800 km) of trailer towing and don’t make full-throttle starts.

Tires, Wheels and Loading

202

2011 Escape (204)
Owners Guide, 1st Printing
USA
(fus)

Advertising