Autolamp delay system (if equipped), Fog lamp control (if equipped), High beams – FORD 2011 Escape v.2 User Manual

Page 55: Lights

Advertising
background image

Autolamp delay system (if equipped)

If your vehicle is equipped with autolamps, you can set the delay time to
keep the headlights on for up to three minutes after the key is turned
off. The delay time is set to 20 seconds at the factory, but the delay time
may be changed by following the steps below (Steps 1 through 6 must
be done within 10 seconds):

1. Turn the vehicle off.

2. Rotate the headlamp control to the autolamp position.

3. Rotate the headlamp control to the off position.

4. Turn the vehicle on.

5. Turn the vehicle off.

6. Turn the headlamp control to the autolamp position (the headlights
should turn on).

7. Turn the headlamp control to the off position when the desired delay
time (up to three minutes) has been reached.

Fog lamp control (if equipped)

The headlamp control also operates
the fog lamps. The fog lamps can be
turned on when the headlamp

control is in the

,

or

positions and the high beams are
not turned on.

Pull the headlamp control towards
you to turn the fog lamps on. The
fog lamp indicator light will
illuminate.

High beams
• Push the lever toward the

instrument panel to activate.

• Pull the lever toward you to

deactivate.

Lights

55

2011 Escape (204)
Owners Guide, 2nd Printing
USA
(fus)

Advertising