Engine coolant, Checking engine coolant, Maintenance and specifications – FORD 2011 Escape v.3 User Manual

Page 300

Advertising
background image

• Always dispose of automotive

batteries in a responsible manner.
Follow your local authorized
standards for disposal. Call your
local authorized recycling center
to find out more about recycling
automotive batteries.

ENGINE COOLANT
Checking engine coolant
The concentration and level of engine coolant should be checked at the
intervals listed in scheduled maintenance information. The coolant
concentration should be maintained at 50/50 coolant and distilled water.
Coolant concentration testing is possible with a hydrometer or antifreeze
tester. The level of coolant should be maintained at the FULL COLD
level or within the COLD FILL RANGE in the coolant reservoir. If the
level falls below, add coolant per the instructions in the Adding engine
coolant
section.
Your vehicle was factory-filled with a 50/50 engine coolant and water
concentration. If the concentration of coolant falls below 40% or above
60%, the engine parts could become damaged or not work properly. A
50/50 mixture of coolant and water provides the following:

Improved freeze protection.

Improved boiling protection .

Protection against rust and other forms of corrosion.

Proper function of calibrated gauges.
When the engine is cold, check the
level of the engine coolant in the
reservoir.

• The engine coolant should be at the FULL COLD level, or within the

COLD FILL or MIN / MAX range as listed on the engine coolant
reservoir (depending upon application).

L

E

A

D

RETURN

RECYCLE

Maintenance and Specifications

300

2011 Escape (204)
Owners Guide, 3rd Printing
USA
(fus)

Advertising