Driver controls – FORD 2011 Expedition User Manual

Page 109

Advertising
background image

To close the liftgate with the
rear cargo area control button:

Press and release the control on the
left rear quarter panel to close the
liftgate. The chime will beep once if
conditions are not correct to start
an operation (i.e., the vehicle is out
of park). In a normal close, the
chime will begin just before the gate
starts to move and continue for total
of three seconds.

Press and release the control to open or reverse the liftgate.

Rear cargo area control button will not open the liftgate when the
liftgate is latched.

WARNING: Keep clear of the liftgate when activating the rear
switch.

To manually operate the liftgate:

1. Disable the liftgate power function, refer to Message center in the
Instrument Cluster chapter.

2. Open and close the liftgate as you would a standard liftgate.

Note: In case of operation in extreme cold -40°F (-40°C), or on extreme
inclines, manual operation of the liftgate is suggested.

Obstacle detection

The power liftgate system is equipped with an obstacle detection feature.

If the power liftgate is closing, the system is designed to reverse to full
open when it encounters a solid obstacle. A three second chime is also
sounded when an obstacle is detected. Once the obstacle is removed, the
liftgate can be closed under power.

If the power liftgate is opening, the system is designed to stop when it
encounters a solid obstacle. A chime will sound for three seconds while
the obstacle is present.

Driver Controls

109

2011 Expedition (exd)
Owners Guide, 1st Printing
USA
(fus)

Advertising