One-touch up or down (front windows only), Bounce-back (front windows only), Driver controls – FORD 2011 F-150 v.2 User Manual

Page 101

Advertising
background image

Press and pull the window switches
to open and close windows.
• Press down (to the first detent)

and hold the switch to open.

• Pull up (to the first detent) and

hold the switch to close.

Rear Window Buffeting: When one or both of the rear windows are
open, the vehicle may demonstrate a wind throb or buffeting noise. This
noise can be alleviated by lowering a front window approximately 2–3 in.
(5–8 cm).

One-touch up or down (front windows only)

This feature allows the driver or passenger’s window to open or close
fully without holding the control down.

To operate one-touch down, press the switch completely down to the
second detent and release quickly. The window will open fully.
Momentarily press the switch to any position to stop the window
operation.

To operate one-touch up, pull the switch completely up to the second
detent and release quickly. The window will close fully. Momentarily
press the switch to any position to stop the window operation.

Restoring the one-touch up functionality (front windows only)

Under low battery power conditions, one-touch up only functionality may
be lost. To reset this function after restoring full battery power, pull the
switch to the one-touch up position, hold the switch until the glass
reaches the stall position and continue to hold for two seconds. Press the
window switch down and operate the window to the full down position.
One-touch up will now be functional. Perform one-touch up
re-calibration with the door closed only. Calibrating with the door
open will cause the window to continuously bounce back.

Bounce-back (front windows only)

When an obstacle has been detected in the window opening as the
window is moving upward, the window will automatically move down and
stop.

Driver Controls

101

2011 F-150 (f12)
Owners Guide, 2nd Printing
USA
(fus)

Advertising