Programming memory feature to transmitter, Deprogramming memory feature from transmitter, Replacing the battery – FORD 2011 F-550 v.4 User Manual

Page 142: Locks and security

Advertising
background image

Note: The panic alarm will only operate when the ignition is off.

Memory feature (seat, mirrors and adjustable pedals)

The integrated keyhead transmitter (IKT) allows you to recall the
memory seat/power mirrors/adjustable pedals feature.

Press

to automatically move the driver seat, power mirrors and

adjustable pedals to the desired memory position. (The seat position
corresponds to the transmitter being used).

Programming memory feature to transmitter

To activate this feature:

1. Move the driver seat, power mirrors, and adjustable pedals to the
desired positions using the associated controls.

2. Press and hold control button 1
for five seconds. A tone will be
heard after two seconds confirming
memory position has been set.
Continue to hold until a second tone
is heard after five seconds.

3. Within three seconds press

.

4. Wait 10 seconds, then press

.

5. Repeat this procedure for
memory 2 and another transmitter if
desired.

Deprogramming memory feature from transmitter

To deactivate this feature:

1. Press and hold either the 1 or 2 control on the driver’s door for five
seconds. A tone will be heard after 1

1

2

seconds when the memory store

is done, continue to hold until a second tone is heard after five seconds.

2. Within three seconds press

.

3. Repeat this procedure for another transmitter if desired.

Replacing the battery

The integrated keyhead transmitter (IKT) or intelligent access key (IA
key) uses one coin type three-volt lithium battery CR2032 or equivalent.

Locks and Security

142

2011 F-250/350/450/550 (f23)
Owners Guide, 4th Printing
USA
(fus)

Advertising
This manual is related to the following products: