FORD 2011 Fiesta v.3 - Manual (Page 26)

• Occupancy mode: Scroll to select Occupancy mode and move
right or press OK to enter. Then, scroll to select from Optimize All
or Optimize Driver. Occupancy mode optimizes sound quality for
the chosen seating position. Press OK to confirm your selection.
• DSP Equalizer: Scroll to select DSP Equalizer and scroll to select
from Rock, Pop, Classic, Voice and Equalizer off. Press OK to
confirm your selection.
• Vehicle: Refer to Multi-function display in the Instrument Cluster
chapter for more information.
• Clock: Refer to Multi-function display in the Instrument Cluster
chapter for more information.
• Display: Refer to Multi-function display in the Instrument Cluster
chapter for more information.
• Messages: Refer to Multi-function display in the Instrument Cluster
chapter for more information.
10. AUX Press to access LINE IN (auxiliary input jack) mode.
11. SIRIUS Press repeatedly to access SAT1, SAT2 and SAT3 satellite
radio modes (if equipped).
12. RADIO: Press repeatedly to select AM/FM1/FM2 frequency bands.
Press RADIO to return to the radio base screen when browsing. While
listening to radio, you can navigate to other presets and modes by
pressing
/ . When the desired selection is chosen, press OK to
tune to the selection or press RADIO to go back to current station.
Autostore feature: The autostore feature allows you to store the six
strongest local stations available from the AM and FM frequency bands.
To use, select AST. The display will read ‘Hold to start autostore’.
Continue holding the button until ‘Autostoring’ appears in the display.
When the search is complete, the sound will return and the six strongest
stations will be stored in the memory presets (and overwrite any stations
previously stored in the AST band).
Note: You can also manually store stations in the AST band. When the
AST band is active, simply tune to the desired station and press and hold
a memory preset. The new station will be saved and will override the
previously saved station.
13. CD: Press to enter CD mode (if equipped). While in CD mode,
press
/ to navigate to other tracks/folders or Radio bands/stations.
When your desired selection is chosen, press OK to select or press CD to
return to the current track.
Note: If CD DRIVE HIGH TEMP appears in the display, the ambient
temperature is too hot and the CD unit will not operate until it has
cooled down.
Entertainment Systems
26
2011 Fiesta (fie)
Owners Guide, 3rd Printing
USA (fus)