FORD 2011 Fusion Hybrid v.2 - Manual (Page 112)

MyKey
௡ is successfully programmed. Make sure you label it so you can
distinguish it from the admin keys. Note: To program the optional
settings go to Step 2 in the Programming MyKey
௡ Optional Settings
section. If your vehicle is equipped with remote start, see the Using
MyKey
௡ with Remote Start Systems section.
Note: The MyKey
௡ can be cleared within the same key cycle that it was
created, otherwise a standard key (administrator key) is required to
clear the MyKey
௡ programming. To clear all MyKeys௡ go to Step 2 in the
Clear MyKey
௡ section.
Programming MyKey
௡ optional settings
Turn the ignition on using an admin key and do the following:
1. Press SETUP until the feature you want to change is highlighted.
2. Press RESET to select the item.
3. Press SETUP to scroll through the list of options and then reset to
select it.
Clear MyKey
௡
To reset all MyKeys
௡ as admin keys, start the vehicle using an admin key
and then press SETUP to choose the Clear MyKey option in the settings
menu. Press RESET to select Clear MyKey and then press and hold
RESET to confirm clear.
Check MyKey
௡ system status
The vehicle system check will provide the status of the following MyKey
௡
parameters. Press SETUP to reach System Check. Then press RESET
and the message center will cycle through the vehicle systems. The
following items will display for MyKey:
• MyKey Used — This is shown when at least one MyKey is
programmed.
MyKey Miles — This will be displayed on the right side of the cluster
when MyKey Used is displayed on the left side of the cluster. This
odometer only tracks mileage when a MyKey
௡ is used. If mileage does
not accumulate as expected, then the MyKey
௡ is not being used by the
intended user. The only way to reset this odometer to zero is by
clearing MyKey
௡. If this odometer is lower than the last time you
checked, then the MyKey
௡ system has been recently cleared.
• # MyKey(S) Programmed — Indicates how many MyKeys௡ are
programmed to the vehicle. Can be used to detect deletion of a
MyKey
௡.
• # Admin Key(s) Programmed — Indicates how many admin keys are
programmed to the vehicle. Can be used to detect if an additional
spare key has been programmed to the vehicle.
Locks and Security
112
2011 Fusion Hybrid (hfv)
Owners Guide, 2nd Printing
USA (fus)