Cub Cadet 60 - Manual (Page 13)

13
Using The Hose Assembly
1. Place nozzle/hose vac handle in the bottom position
on the nozzle to redirect vacuum to the hose assem-
bly. See Figure 4-5.
2. The spring loaded pin must be in the second hole of
the hose adapter to operate the hose assembly.
3. Unhook the hose from upper handle bracket and
grasp the hose handle to guide while vacuuming yard
waste such as leaves or pine needles in hard to reach
places.
Figure 4-
4
Operating
Your Yard
Vacuum
WARNING
Do not attempt
to shred, chip, or
vacuum any material
larger than specified
on the machine or in
this manual. Personal
injury or damage to
the machine could
result.
Do not at any time
make any adjust-
ments without first
stopping engine and
disconnecting spark
plug wire.